Circuit transformation can not be sloppy away from electricity safety hazards

Circuit modification in home improvement is very important. If there are problems in circuit reconstruction, it may bring potential safety hazards to the home. Specifically, the circuit transformation includes the transformation of strong and weak currents, and there are many issues when the circuit is modified. Particular attention is paid to the decoration owner, especially the purchase of wires, wire tubes and switches and sockets. Follow the small series together to understand the circuit modification precautions.

Here are some of the lessons learned from the transformation of strong and weak electricity and the purchase of switch sockets.

First, the telephone line and network cable should be designed rationally

If your home is connected to the Internet through a telephone line (such as ADSL), you must plan when you answer the phone line and network cable. Many people can't use the phone on the Internet at home, or some people can't use the home network cable. That's when the design is made wrong. There are some Raiders on the Internet, but people can't read it clearly. Now we can use the vernacular to everyone. Talk about how to take the phone and network cable.

1, the phone line of the total entrance hole is best left to the computer desk, the phone line from the bus out of the ADSL dedicated to the distribution box, and then from the junction box on the hole that says PHONE can take a After the phone is divided into a line and then access to the wall (there is a telephone line jack on the wall), divided into the telephone hole in other rooms.

2. The telephone line coming out of the above ADSL distribution box is directly plugged into the ADSL dedicated cat. The cable from the ADSL cat can be plugged directly into the computer. However, if you want to achieve access to the Internet in other rooms, then you have to put ADSL. The network cable from the cat is plugged into the router, and the line from the router is passed back to the wall (there is a network cable jack on the wall), and it is connected to other rooms. Pay attention to access to several different rooms. Leave several different network cable jacks.

The above are all about traditional methods. Not only are there more lines, but the cost of the project is not low. It is also easy to make mistakes. In fact, there is an even simpler method. That is to use a wireless solution. If you use a wireless solution, it should be the same as the above two points. Operation:

Wireless 1. The total entrance of the telephone line is preferably left at the computer desk. The telephone line comes out of the bus and is connected to the ADSL dedicated distribution box. Then the hole of the PHONE is written out from the distribution box and directly connected. Go to the parent machine of the wireless device (preferably a digital cordless phone), and then you need to use the phone in which rooms. You can use this machine with several handsets, and you can use it in any other room.

Wireless 2. The telephone line coming out of the above ADSL distribution box is directly plugged into the ADSL dedicated cat. The cable from the ADSL cat can be plugged directly into the computer, but if you want to achieve other rooms, you can also access the Internet. The network cable from the ADSL cat is plugged into the wireless router (also called AP, pay attention to the corresponding model of the machine according to the area of ​​the home), and as long as your computer has a wireless internet (Wi-Fi) you can access the Internet in any room. , Nowadays, notebooks are equipped with wireless internet cards. Even if some computers do not have any connection, it is OK to buy a wireless network card with a USB jack (usually only a few dozens). Many people worry that the speed of wireless Internet connection will be slow. In fact, it does not exist, as long as the installation is correct, wireless LAN and wired LAN as fast.

Second, the choice of circuit reform tube

The wall of the wire must pass through the pipe. Generally, there are two kinds of metal pipes and PVC pipes:

Metal pipes are more expensive, but their anti-jamming performance is stronger than that of PVC pipes and they are not afraid of fire. In the future, the protection of electric wires will be stronger than that of PVC pipes (for example, the use of PVC pipes may inadvertently break into the wall when nailing).

PVC pipe is affordable, turning is easier than metal pipe, and insulation performance is good.

In fact, the general family choose PVC pipe is very good, but to choose a solid, simple method is to step on the foot, will not be stepped on is good. Finally reminded: No matter what type of pipe threader is used, the cable cannot have a connector in the pipe.

Switch Switch Socket Switch Socket Mount Switch Socket Optional Switch Socket Brand

1 2 Next> Total 2 Page
Page to page
Function assignPage() { var page = $('#page_val').val(); if (/_\d+\.html$/.test(location.href)) { location.href = location.href.replace( /_\d+\.html/, ((page == 1) && 1? '' : '_' + page) + '.html') } else if(/\/\d+\.html$/.test (location.href)) { location.href = location.href.replace(/(\d+)\.html/, ((page == 1) && 1? '$1' :'$1_' + page) + ' .html') } } $(function(){ $('#page_form').submit(function() { assignPage() return false; }) $('#page_btn').click(function(){ assignPage( ); return false; }) }) See full story

PE Plastic Rodfull name is Polyethylene Rod.

Physical properties: PE  plastic Rod is the most simple structure of the macromolecular organic compounds, the world's most widely used polymer materials, composed of ethylene polymerization, depending on the density is divided into high density polyethylene Rod, medium density polyethylene and low density polyethylene.


Classification of PE Rod
(1) LDPE Rod
       Low density polyethylene Rod (also known as high pressure polyethylene Rod)
       
(2) LLDPE Rod
       Linear low density polyethylene

(3) MDPE Rod
       Medium density polyethylene
       
(4) HDPE Rod
       High density polyethylene (also known as low pressure polyethylene)


 (5) UHMWPE Rod 

      Ultra high molecular weight polyethylene

 (6)Modified polyethylene Rod
      Chlorinated polyethylene (CPE) and crosslinked polyethylene (PEX)

 (7)Ethylene - ethylene copolymer
     Ethylene/propylene copolymer (plastic), EVA, ethylene, ethylene butene copolymer - other olefins, such as octene POE, cyclic olefin copolymer, ethylene/unsaturated ester copolymer (EAA, EMAA, EEA, EMA, EMMA, EMAH).
Polyethylene, which has a molecular weight of 3 million to 6 million, is known as UHMWPE.

Ultra high molecular weight polyethylene Rod is very strong and can be used for body armor.


Applications:
1. Papermaking industry: suction box board, scraper, molding plate, bearing, gear;
2. Mining industry: charging barrel, abrasive and adhesive-resistant back lining for warehouses;
3. Chemical industry: acid pump, filter plate, worm gear, bearing;
4. Food industry: packing machinery parts,   bottle guide, screw, wear plate, slide way, stud weld, roller and other transmission parts;
5. Textile industry:buffer board;
6. Food processing industry: chopping block, refrigerating plant;

7. Wharf: anti-collision board.


Advantages: 
1. Acid and alkali resistance, resistance to organic solvents 
2. Excellent electrical insulation and static resistance
3, Can still maintain a certain touness even at low temperature
4. Extremely high impact strength
5. Low friction coefficient
6. Non-toxic
7. Low water absorption
8.Lower density than any other thermoplastic plastics (<1g/cm3)

 Disadvantages:
 PE Plastic Rod have Weak mechanical property, air permeability, easy deformation, easy ageing, brittle, brittle less than PP, easy stress cracking, surface hardness, easy to scratch.
Difficult to print, in printing, surface discharge treatment, cannot electroplating, the surface has no luster.
       
       
Specification: the diameter of the PE rod can be produced from 2mm to 250mm. The conventional length is 1000mm, and the length is unlimited.
The thickness of PE Rod material can be produced from 0.3mm to 1.9mm, the normal width is 600mm, the width cannot exceed 1200mm, the length is not limited.
The thickness of plate can be produced from 2mm to 180mm, the usual specification of 2-10mm is 1000mm* 2000mm, and the commonly used specification of10-180mm is 600*1200mm.PE Rod can also be customized according to requirements, and the width cannot exceed 1200mm, and the length is not limited
 

Color: natural color is wax white, also can be customized black and color, the order of the color to order is 500KG.


Modified varieties: PE sheet/rod can be added to the fiberglass, copper powder and molybdenum disulphide to enhance the bar.
Add antistatic agent to the permanent antistatic electric bar, and the volume resistance value is between 6 to 9 power of 10.Add flame retardant to the flame retardant rod from UL 94V-0 to HB flame retardant grade, and other modification requirements are required to customize various additional properties according to the actual use of the customer.


Combustion characteristics:

Combustion situation: easy

Combustion flame status: molten drop, yellow lower blue

After the fire: continue to bur

Smell: the smell of wax burning

    

 Product certification: most environmental certification reports and safety reports for raw materials, such as SGS report, CTI report, UL report, MSDS safety information, etc.

Pe Plastic Rod

Pe Plastic Rod,Polythene Rod,Polyethylene Pipe,Pe Rod Pipe

Dongguan Noegem Plastic Products Co.,Ltd , http://www.noegempLastic.com

Posted on