Ordinary floor construction process

Thin floor

Specific practices and requirements for undercoat
1. Use solvent-based epoxy single-part primer or solvent-free epoxy primer (main paint: curing agent = 5:1 mix, and stir evenly.
2. Brush evenly with roller and brush, no leakage.)
Putty layer
1. Use a solvent-based epoxy paint (1:1) or a solvent-free epoxy (5:1) in proportion and add appropriate amount of filler (such as quartz powder and talcum powder) to mix well.
2. scrape 1-2 times with a batch knife, the focus is to fill the pit defects;
3. After curing, grind and polish defects such as knife marks, vacuum cleaners, feather dusters, and wrung wet towels.
Top coat
1. Use a solvent-based epoxy topcoat (1:1) or a solvent-free epoxy topcoat (5:1) to mix in proportion and stir evenly.
2. Dip the top coat with the prepared roller, roll it evenly, and require a uniform coating with no missing paint.
Wear layer
1. This process can be selected and used according to the needs of the user;
2. 12-24 hours after the completion of the construction, that is cured to the pedestrian without leaving the imprint. The epoxy wear-resistant layer paint roller coating again, can greatly improve the floor finish and durability.

Graphite Scrap

Graphite Scrap,Liquid Graphite ,Carbon Graphite Powder ,Isostatic Graphite

Graphite & Products Co., Ltd. , http://www.nbgraphite.com

Posted on