Fine craftsmanship and skilled operation are very important for aluminum foil bag printing
, which deeply affects the quality of aluminum foil bag printing, and is also the key for manufacturers to obtain aluminum foil bag printing market. The following Jiuzhi Plastics Network will introduce some tips on the printing process of aluminum foil bags from the aspects of pigments, connecting materials and drying time, as follows:
1. The size of the pigment particles and the degree of dispersion
Although the role of the ink film capillary is an important factor in forming the gloss of the print, the apparent size of the pigment particles in the dispersed state is more important, which directly determines the state of the capillary of the ink film. Therefore, the pigment particles are small and well dispersed, which is advantageous for forming a smooth ink film, and is also very advantageous for improving the gloss of the aluminum foil bag.
2. The viscosity of the binder and the content of the pigment
According to the interface chemistry, the capillary permeation rate is inversely related to the viscosity of the liquid, that is, the permeation rate decreases as the viscosity increases. The capillary network structure formed between the ink pigment particles is an important aspect that determines the gloss of the print. At the moment of imprinting, the ink is integrally pressed into the larger pores of the paper; after imprinting, the binder begins to separate from the ink and penetrate into the smaller pores of the paper. Therefore, the size of the ink film capillary determines the amount of separation of the binder. Capillary retention of the binder is much more effective than printing pressure to press the binder into the paper pores.
3. Drying time
The rapid drying of the ink film on the paper surface can reduce the amount of the binder which penetrates into the paper pores, thereby improving the gloss and smoothness of the ink film. The high gloss of the ink film means that the specular reflection of the surface is relatively high, so that the human eye can see that the white light reflected by the surface is much less than the ink film with low glossiness in most cases, so that the saturation of the color is more high. Therefore, the print with high gloss looks more vivid and full. The printing ink layer of the spot color ink is mostly translucent or opaque. When selecting the ink formula, the influence of the light transmittance of the ink layer on the spot color printing should be considered according to the actual situation.
low carbon iron wire,stainless steel wire and PVC coated wire
2.Wire Mesh style:
1-Electro galvanized wire mesh
2-Hot-dipped galvanized wire mesh
3-PVC coated wire mesh
4-stainless steel wire mesh
3.Wire Mesh type:
Weaving wire mesh: plain weave ,twill weave ,plain dutch weave ,twill dutch weave ,bead knitting
Welded wire mesh: welded before galvanized, welded after galvanized
Punching wire mesh, Expand wire mesh, Square Wire Mesh etc.
Wire Mesh Series
Wire Mesh Series,Galvanized Iron Wire Mesh ,Wind Dust Net,Square Wire Mesh
Anping Shengjia Hardware Mesh Co.,LTD , https://www.oilshaleshakerscreen.com